提供免費試用 PVIP 題庫資料

PVIP 試題及答案作為試用，目前我們只提供PDF版本的試用DEMO，軟件版本只提供截圖。這樣一來您就知道最新的 NABCEP PVIP 培訓資料的品質，希望 NABCEP PVIP 考古題是廣大IT考生最佳的選擇。

我們為考生提供了只需要經過很短時間的學習就可以通過考試的 NABCEP PVIP 在線考題資料。PVIP 題庫包含了實際考試中一切可能出現的問題。所以，只要考生好好學習 PVIP 考古題，那麼通過 NABCEP 認證考試就不再是難題了。

我們承諾使用 NABCEP 的 PVIP 考試培訓資料，確保考生在第一次嘗試中通過 NABCEP 測試，這是互聯網裏最好的 PVIP 培訓資料，在所有的培訓資料裏是佼佼者。NABCEP PVIP 不僅可以幫助您順利通過考試，還可以提高您的知識和技能，也有助於您的職業生涯在不同的條件下都可以發揮您的優勢，所有的國家一視同仁。

購買後，立即下載 PVIP 題庫 (PV Installation Professional (PVIP) Board Certification): 成功付款後, 我們的體統將自動通過電子郵箱將您已購買的產品發送到您的郵箱。（如果在12小時內未收到，請聯繫我們，注意：不要忘記檢查您的垃圾郵件。）

PVIP 題庫具備高通過率

如果您不知道如何更有效的通過 NABCEP PVIP 考試，我給您一個建議是選擇一個良好的培訓網站，這樣可以起到事半功倍的效果。在這裏向廣大考生推薦這個最優秀的 NABCEP 的 PVIP 題庫參考資料，這是一個與真實考試一樣準確的練習題和答案相關的考試材料，也是一個能幫您通過 NABCEP PVIP 認證考試很好的選擇。如果您使用了我們網站的培訓工具，您將100%通過您的第一次參加的 NABCEP 考試。

PVIP 擬真試題覆蓋了真實的考試中的問題，已經成為考生通過 NABCEP 的 PVIP 考试的首選學習資料。NABCEP PVIP 考試主要用於具有較高水準的實施顧問能力，獲取 NABCEP Board 證書，以確保考生有一個堅實的專業基礎知識，有利於他們將此能力企業專業化。準備 NABCEP 考試的考生，需要熟練了解 NABCEP 的 PVIP 擬真試題，快速完成測試，就能高效通過 NABCEP 認證考試，為您節省大量的時間和精力。

PVIP 是高品質的題庫資料

還可以為客戶提供一年的免費線上更新服務，第一時間將最新的資料推送給客戶，讓客戶瞭解到最新的 NABCEP PVIP 考試資訊，所以本站不僅是個擁有高品質的題庫網站，還是個售後服務很好的網站。

PVIP 題庫資料肯定是您見過的最好的學習資料。為什麼可以這麼肯定呢？因為再沒有像 NABCEP 的 PVIP 這樣的優秀的題庫資料，既是最好的題庫資料保證您通過 PVIP 考試，又給您最優質的服務，讓客戶百分之百的滿意。我們的最新 NABCEP PVIP 試題及答案，為考生提供了一切您所需要的考前準備資料，關於 NABCEP 考試的最新的 PVIP 題庫，考生可以從不同的網站或書籍找到這些問題，但關鍵是邏輯性相連，NABCEP 的 PVIP 題庫問題及答案能第一次毫不費力的通過考試，獲得 NABCEP Board證書。

最新的 NABCEP Board PVIP 免費考試真題:

1. A commercial 600v carport-mounted PV system is installed with rigid running under the parking lot to an inverter pad located at the edge of the parking lot. At what depth below the parkinglot base MUST condult be buried?

A) 18 in.
B) 12 in.
C) 24 in.
D) 36 in.

2. A7KW/ 14 KWh multimode systemhas been installed at a residence, ac-couple with the customer's existing
6.7kwh ac PV system. The system providers uninterrupted power to a protect loads subpanel, which is connected to a refrigerator, Microwave, 1.0 ton are conditioner, three lightning circuit, and the 6.7kwac PV system. One month later, the homeowner moves additional circuits to the protected loads subpanel, substantially increasing the loads. Why would this cause, the backfed interconnection breaker in the main service panel to trip?

A) The total load exceeds the system's energy storage capacity of 14kWh.
B) The toad exceeds the capacity of the interconnection breaker.
C) The main service panel is no longer compliant with NCC 705.12.
D) The load the protected loads subpanel exceeds the PV system ac rating by 25%.

3. A grid-connected PV system on a dwelling is producing 30% less power than expected. The conductors from threes strings of modules enter into a 3-pole fused dc disconnect, and each ungrounded conductor is connected to a separate pole. On the inverter side of the switch terminals, the three strings are combined. The dc disconnect switch is opened. The voltages on the array side of theswitchare 440 on string #1, 444V on string
#2, and 0V on string #3. The dc disconnect is then closed and the inverter resumes operating, still producing about 30% less power than expected. A clamp-on ammeter is used to measure the dc current of each string of each string of modules where they enter the rooftop junction box. The operating currents of each string are
3.9A for string #1, 3 85A for string #2, and 4.3 A for string #3. What is the MOST likely with the system?

A) There is lower module mismatch in string #3 than in string #1 and #2.
B) A ground fault is causing the current from strings #1 and #2 to flow into string #3.
C) Positive and negative output conductors of string #3 are faulted together.
D) String #3 has an open connection and is not contributing any voltage.

4. A PV technician is installing a 6.5KWac inverter using a 40A backfed breaker. The single line shows a 200A panelboard with a 200A breaker, but the installer finds that the panelbord actually has a 150A main breaker.
Which of the following is the CORRECT installation option?

A) Replace the 200A panel with a 150A panel.
B) Complete the installation as noted above.
C) Change the main circuit breaker to a 200A unit.
D) Install a 30A backfed circuit breaker.

5. Inspection of a new PV installation shows that the dwelling uses a galvanized water pipe for its grounding electrode and that the PV system now shares the connection. Which of the following is an acceptable supplemental electrode method to ensure the integrity of having a grounding electrode?

A) Connecting the water pipe to the service entrance panel metal structure
B) Connecting the water pipe to a gas pipe that is known to be solidly grounded
C) Connecting the service panel to an auxiliary ground used by a lightning protection system
D) Connection the service panel to a copper-clad steel ground rod near the panel

問題與答案：

問題 #1 答案： C

問題 #2 答案： B

問題 #3 答案： C

問題 #4 答案： B

問題 #5 答案： A